Engineering would be much easier if the water would always arrive at the same pace.
It’s not.
The amount of water that goes into a water system can change throughout the day. Commercial and industrial facilities could encounter peak operating times. Stormwater flow is affected by weather conditions. Demand for clean-water also increases and falls depending on the usage.
Image credit: romtecutilities.com
As a result, designing a pump station isn’t simply a matter of identifying one flow number and selecting equipment capable of meeting it. Engineers need to know the possible conditions in which the system may be used.
Do not just think of the capacity of your equipment, but also operational conditions
It is obvious that maximum flow is an essential element however, it’s just a part of the operation of an infrastructure. Imagine that a wastewater treatment system was created to handle a large flow at peak. Most of the time the incoming flow is less. During these normal operating times however, the station will be functional.
It brings up issues like the sizing and size of the pump controls conditions for head, how to adapt equipment when demand shifts.
A properly designed package pumping system brings these elements in line with the requirements of the location, instead of treating maximum pump capacity as the entire design objective.
Wastewater Has Its Own Daily Timeline
In the course of the lifecycle of a wastewater lift station influent conditions may alter.
The system needs to collect the wastewater and turn on its pumps according to the established control plan by the station. The structural dimensions, pumping equipment, valves, piping, electrical components, and controls all have roles in that process.
Design can also include other considerations for the specific site. Romtec Utilities can incorporate auxiliary equipment like grinder vaults, odor control equipment and so on when required by the application. This produces a facility designed to meet the needs of the needs of the project, rather than being a generic design which can be applied to all wastewater sources.
Stormwater changes much more quickly
Stormwater provides a totally different operating environment. A stormwater station may be quiet during dry weather, but encounter a significant inflow of water when there is a significant weather event. It could be part of a flood control plan or a detention, treatment or drainage plan.
When designing these systems Romtec Utilities considers a variety of elements, including the flow rate required and head condition, the system size, site needs and environmental factors.
A station that serves a commercial development may therefore look distinct from one that was designed for a municipal stormwater application.
Head Conditions Are Important Alongside Flow
Engineers also need to know what direction the water is headed and the resistance they be able to overcome. Engineers also have to determine where the water will go, and the resistance that must be overcome by the pumping system.
Pumps can operate at different head levels depending on the design of the system, like the piping, discharge conditions, etc.
The connection between flow rate and head is the reason why choosing a motor based solely on its capacity does not work. The technology of the pump and station configuration should be designed to meet the hydraulic conditions of the whole application.
Create a design that is based on the conditions the station will experience
Romtec Utilities develops customized pumping systems for stormwater, wastewater and clean water, booster, industrial, and other applications. The process starts with initial design plans, budgeting, set-ups and system equipment, as well as documentation, testing and startup.
The fundamental principle of engineering is that a genuine pumping systems don’t work in a set of conditions.
They face changing flow, fluctuating demand, and project-specific hydro requirements. A successful station must be designed for this reality.
